Parts and Repair (6)

Adhesive YKK SNAD Snap studs allow you to use snap-attachment accessories without drilling into your boat to rivet a standard snap stud. They attach with 3M VHB adhesive tape that’s already applied to the back of the SNAD snap.  These SNAD snaps are 25mm in diameter and rigid black plastic. They’re best for smooth surfaces with minimal curvature. If you can place a quarter on the boat in the location you want to apply the SNAD and the quarter lays flat on the surface, the 25mm rigid SNADs should work well. 

Adhesive YKK SNAD Snap studs allow you to use snap-attachment accessories without drilling into your boat to rivet a standard snap stud. They attach with 3M VHB adhesive tape that’s already applied to the back of the SNAD snap.  These SNAD snaps are 25mm in diameter and have a stainless stud attached to a flexible, clear base. They’re best for contoured or moderately curved surfaces and surfaces with mild texture (like the inside of a composite canoe or kayak).  Note: The base appears red in the photographs because the backing on the 3M VHB tape is red plastic film which is removed during installation. 

A replacement drawcord assembly for the Original Bag Lady Canoe Cover. The assembly includes 1/8" braided polyester cord and one cord lock. The draw cord can be cut to length after assembly.  Canoes under 16 feet in length receive 30 feet of cord and canoes 16 to 18-1/2 feet long receive 36 feet of cord. If your canoe is longer than 18-1/2 feet, please contact us to ensure that you receive the right length of cord. 

Replacement HDPE battens for Expedition Spray Decks cockpit tunnels. The battens are made from 1/8" thick HDPE plastic and are 1" wide.    Sold as a set of 2.

A set of 13" long, 1" wide, adhesive loop velcro strips for Paddle Pockets. These can replace a worn out set or be used to outfit additional canoes so that a single set of Paddle Pockets can be used in multiples boats.

One complete replacement shock cord assembly for the Original Bag Lady Canoe Cover, including the 3/16" shock cord, one captive hook, and one open hook. Choose between three standard lengths that are pre-assembled or an unassembled 18" kit that can easily be cut-to-length.